TM 9-2320-279-10-2
M984A1 General Operating Procedures (Cont)
2-73A TOW M1074/M1075 (CONT).
(3)
Remove two cotter pins (4), pins (5), and towing shackles (6) from
disabled vehicle and stow.
(4)
Pull LIFT CYLINDER control lever (7) to lower crosstube (8) to
approximately 3 ft (1 m) above ground.
(5)
Position wrecker so that crosstube (8) is approximately 1 ft (30 cm)
from tow eyes of disabled vehicle and centered on disabled vehicle.
2-186.2
Change 8
