TM 9-2320-279-10-2
M984A1 General Operating Procedures (Cont)
2-73A TOW M1074/M1075 (CONT).
(14)
Remove two 16-foot (5 m) safety chains (20) from wrecker stowage.
Route chain end without safety shackle, over walking beam (21)
behind No. 1 axle (22) on disabled vehicle.
(15)
Hook safety chain (20) together under walking beam (21).
(16)
Repeat steps (14) and (15) for other side of disabled vehicle.
NOTE
S Safety chains are connected to safety chain hoop.
S Adjust chain slack so chains are approximately 6 in.
(150 mm) above the ground.
(17)
Route two safety chains (20) through safety chain hoop (23) on
wrecker and secure grab hook (24) with safety shackle (25).
(18)
Wrap two springs (26) around crosstube (8) and secure.
2-186.6
Change 8