TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
2-76. TOW M123 (CONT).
NOTE
Use retrieval controls to position crosstube to relieve
tension from adapters.
(12)
Remove two quick pins (15) and pins (16) from adapters (17).
(13)
Remove two adapters (17) from tow eyes (18) on disabled vehicle.
(14)
Install two pins (16) in adapters (17).
(15)
Install two quick pins (15) in pins (16).
(16) Drive wrecker forward several feet and park (para 2-110).
WARNING
When springs and end caps are removed, crosstube can
swing in all directions, adapters can slide off, and can
cause personal injury.
(17) Remove two springs (12) from tow cylinders (14).
(18) Remove two quick pins (19) and pins (20) from end caps (21).
(19) Remove two end caps (21) from crosstube (13).
2-254
