TM 9-2320-279-10-2
M 9 8 4 E 1 General Operating Procedures (Cont)
(37) Route other end of tow light cable (38) along disabled vehicle and
connect to rear electrical connector (39) on wrecker.
(38)
Lock disabled vehicle's steering (refer to M1008 operator's manual).
(39)
Set POWER switch (40) to ON position.
(40)
Set HIGH IDLE switch (41) to CONTINUOUS.
(41)
Push and release LATCH switch (42). Engine speed will increase to
approximately 1500 rpm.
2-614
