TM
9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
(17.1) Remove and stow two 5-in. (127 mm) spacers (19) from crosstube (11).
(18) Remove two adapters (15) from crosstube (11) and place on equipment
body floor (20).
(19) Remove and stow two 4-in. (102 mm) spacers (21 ) from crosstube (1 1).
(20) Remove lock handle (22), lock plate (23), and two M977 front
adapters (24).
(21) Install two M1008 adapters (15), removed from crosstube, lock
plate (23), and lock handle (22).
2-641
Change 1
