TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
2-86. POWER PLANT REMOVAL/lNSTAU.ATlON (CONT).
WARNING
Attach guide rope to sling to prevent uncontrolled
movement while positioning crane. Personal injury or
equipment damage may. result.
NOTE
Retrieval system may be lowered to assist in getting
closer to vehicle.
Position wrecker for best access to power plant and
as close as possible,
Refer to applicable vehicle Technical Manual to
connect lifting sling to power plant.
(2) Position rear of wrecker directly in line with power plant (1) and as
close to vehicle as possible without making contact.
(4) Attach sling or special tool to crane load hook (2).
(5) Move HOIST control lever (3) and BOOM control lever (4) to UP position
to lift sling (5) and operate SWING control lever (6) and TELESCOPE
control lever (7) to position sling over power plant (1).
(6) Operate HOIST Control (3) to lower sling (5) to allow sling chains
to be connected to to power plant.
