TM 9-2320-279-10-2
Preparation for Transport and Operation (Cont)
(18) Set POWER switch (26) to ON (LOW IDLE ONLY).
(19) Push and release LATCH switch (27) to ON.
(20) Set H.D. WINCH CONTROL switch (28) to REMOTE.
(21) Set HIGH IDLE CONTROL switch (29) to HEAVY-DUTY WINCH.
(22) Set HEAVY-DUTY WINCH switch (23) to ON.
Keep cable end under observation at all times. Watch
carefully as cable is reeled in through fairlead and
underneath vehicle. Stop reeling immediately if cable
catches or hangs; damage to equipment may occur.
(23) Move WINCH control lever (30) to IN and slowly wind up winch cable
until clevis (13) just touches cable guide sheave (31).
(24) Set HEAVY-DUTY WINCH switch (23) to OFF.
E-7