TM 9-2320-285-10
2-14.
OPERATING PROCEDURES (Continued)
g. Tilting Cab 45 Degrees.
(1)
Turn key switch off and pull out PARKING BRAKE valve to apply tractor spring brakes.
(2)
Tilt cab grille guard forward; refer to illustration below and proceed as follows:
(a)
Pull two pin retainers (1) from two pins (2).
(b)
Pull two pins (2) from ends of cab grille guard (5).
(c)
Pull two pin retainers (3) from two pins (4).
(d)
Support cab grille guard (5).
WARNING
Support cab grille guard when performing step 2-14g(2)(e) below. The grille guard is heavy; do not allow it
to fall forward freely. Carefully ease top of grille guard forward. Failure to follow this procedure could
result in injury from falling grille guard. If you are injured, obtain medical aid immediately.
(e)
Pull two pins (4) from cab grille guard (5).
(f)
Carefully tilt cab grille guard (5) forward.
2-44
