TM 9-2320-360-10
CAUTION
Do not force TRANSFER CASE shift lever. Lever may be hard to
move if there is a driveline windup. Using excessive force may
cause damage to shift linkage or change linkage adjustment.
Do not move TRANSFER CASE shift lever when HET Tractor is
moving or when transmission is in gear. Damage to driveline
could result.
NOTE
If TRANSFER CASE shift lever is hard to move, it may be necessary
to pull release lever up and set transmission range selector to 2-5
and/or R (reverse), then back to N (neutral) position. If transfer case
still will not shift, refer to Table 3-1, Troubleshooting.
(4) Select transfer case position.
(2-136.1 blank) 2-136.2 Change 3
