TM 9-2320-360-10
2-19. WINCH OPERATION (CONT)
CAUTION
Never move main winch controls to CABLE OUT position with
CABLE HOLD DOWN liver in ON position. Failure to comply may
result in cable tangling up on drum and damage to equipment.
(8) Move CABLE HOLD DOWN lever (6) to OFF position.
(9) Pull up on control levers (7) just enough to relieve tension on winch cables.
(10) Push CABLE HOLD DOWN lever (6) to ON position.
CAUTION
Never release kickouts with winch under load.
Damage to
equipment and load will result.
NOTE
There are separate controls for driver's side winch and
passenger's side winch. Use appropriate controls for winch
being used.
If the kickouts do not disengage, it may be necessary to rotate
the winch drum slightly back and forth using the winch
controls. This will relieve any tension so the kickouts can
function.
Kickouts are disengaged when winch drums do not turn when
control levers are actuated.
(11) Release DRIVER'S WINCH KICKOUT control (8) and PASSENGER'S WINCH KICKOUT
control (9).
2-160 Change 1
