TM 9-2320-360-10
Table 3-1. Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
HET TRACTOR WANDERS, PULLS TO ONE SIDE, LEANS, OR
SHIMMIES (CONT).
Step 3.
Remove wheel coves and check for damaged, loose, or missing
wheel lugnuts.
Tighten lose lugnuts. Notify unit maintenance of damaged lugnuts
and to tighten loose lugnuts to proper torque value.
Step 4.
Check front spring assemblies and shock absorbers on front axle for
loose mountings and damage.
Notify unit maintenanc e if front spring assemblies or shock absorbers are
loose or damaged.
Step
Check linkage on ride height valves.
Notify unit maintenance if linkage is damaged.
Step 6.
Check for level ride height. Difference in distance between bottom
of frame and ground should be less than 1.5 in. (38.1 mm) from side to
side.
If distance is greater than 1.5 in. (38.1 mm), ride height requires adjustment.
Notify unit maintenance.
3-25
