TM 9-2320-366-10-2
d. Lower Underlift Assembly.
(1) Remove underlift assembly lock pin (1) from boom frame (2).
(2) Position UNDERLIFT FOLD lever (3) to DOWN until boom frame (2) is fully unfolded.
CAUTION
Ensure underlift assembly lock pin is installed when underlift assembly is
fully unfolded. Failure to comply may result in damage to equipment.
(3) Install underlift assembly lock pin (1) in boom frame (2).
(4) Position wrecker so that centerline of disabled vehicle is in line with nut (4) on
crossbar (5).
(5) Position UNDERLIFT lever (6) to DOWN until lift tool (7) are aligned with tow eyes
on disabled vehicle.
Change 1
2-489
