TM 9-2320-366-10-2
2-45. M998 SERIES TOWING CONNECTION/DISCONNECTION
(CONT)
CAUTION
Stinger cam lock is normally locked in second rectangular hole on stinger
when towing M998. It may be necessary to lock stinger cam lock in third
rectangular hole on stinger if components mounted on rear of M998 interfere
with movement of crossbar. Lock stinger cam lock in hole which will allow
crossbar to rotate freely. Failure to comply may result in damage to
equipment.
It may be necessary to start with holes 4 or 5 on stinger when recovering a
vehicle on uneven ground. Once level ground is reached, lock stinger in
second hole. Failure to comply may result in damage to equipment.
(14) Place STINGER lever (11) to IN position to retract stinger (12) until desired stinger
cam lock hole (19) is aligned.
(15) Lock stinger cam lock (10).
2-512
