TM 9-2320-366-10-2
d. Rear Disconnection.
(1) Start engine (para 2-27a or b).
(2) Press N (Neutral) button (1) on WTEC II TEPSS (2) or WTEC III TPSS (2).
(3) Pull out SYSTEM PARK control (3).
(4) Position PTO switch (4) to on.
CAUTION
Keep tachometer within 1,250-1,450 rpm when Power Take-Off PTO is
engaged. Failure to comply may result in damage to equipment.
NOTE
In the event of a tachometer failure a HAND THROTTLE lever positioned
to L is approximately 1,250-1,450 rpm.
(5) Set engine speed by increasing HAND THROTTLE lever (5) until tachometer (6)
reads 1,250-1,450 rpm.
2-517
