TM 9-2320-366-10-2
b. Prepare MHC for Use.
WARNING
Do not operate Material Handling Crane (MHC) unless
outriggers are set up and MHC is level from side to side.
Failure to comply may result in serious injury or death to
personnel.
Set up stifflegs if load is swung around rear of vehicle.
Vehicle could turn over if not supported. Failure to comply
may result in serious injury or death to personnel.
Operator must keep load in sight at all times while operating
Material Handling Crane (MHC). Load may unexpectedly shift.
Failure to comply may result in serious injury or death to
personnel.
Do not operate Material Handling Crane (MHC) and 15K Self-
Recovery Winch (SRW) at the same time. Failure to comply
may result in serious injury or death to personnel.
CAUTION
Hydraulic oil level must be at FULL line and hydraulic shutoff and
return valves must be opened before Material Handling Crane
(MHC) is operated. Failure to comply may result in damage to
equipment.
NOTE
MHC will not operate if hydraulic or electrical systems fail. Refer
to para 2-50a and Table 2-22 to verify that MHC settings are
correct for load being lifted. Refer to para 2-67c if hydraulic or
electrical systems fail.
NOTE
MHC can operate on side slope up to 5 degrees.
(1) Start engine (para 2-27a or b).
(2) Position vehicle on level ground so all loading and unloading can be performed from
one position.
2-665
