TM 9-2320-366-10-2
2-62. TOWING DISABLED VEHICLE (CONT)
b. Preparation of Disabled Vehicle (M1078/M1083 Series).
CAUTION
Both drive shafts connected to the transmission transfer case must be
removed if disabled M1078 or M1083 series vehicle is flat towed over
100 miles (161 Km) or towing speed is over 35 MPH. Failure to
comply may result in damage to towed vehicle.
Front axle drive shaft must be removed prior to performing a rear
connection lift and tow. Failure to comply may result in damage to
equipment.
Intermediate axle drive shaft must be removed on M1083 series
vehicles prior to performing a front connection lift and tow. Failure to
comply may result in damage to equipment.
Rear axle drive shaft must be removed on M1078 series vehicles
prior to performing a front connection lift and tow. Failure to comply
may result in damage to equipment.
NOTE
Disabled vehicles must be prepared and moved in accordance with FM
(1) Notify Unit Maintenance to remove drive shafts as required.
(1.1) Press N (Neutral) button (1) on WTEC II TEPSS (2) or WTEC III TPSS (2).
Change 2