TM 9-2320-366-10-2
2-74. AMBER WARNING LIGHT KIT INSTALLATION/REMOVAL
(CONT)
b. Remove Amber Warning Light (All models except M1089).
(1) Disconnect amber warning light plug (1) from electrical connector (2).
(2) Remove amber warning light (3) from cab (4).
(3) Install cap (5) on electrical connector (2).
c. Install Amber Warning Lights (M1089).
NOTE
Left and right side amber warning lights are installed the same way. Right
side shown.
(1) Remove amber warning lights (1) from tool box.
(2) Remove clevis pin (2) and pin (3) from mast (4).
(3) Lift mast lanyard (5) and mast electrical connector (6) from inside mast (4).
(4) Remove dust cover (7) from mast electrical connector (6).
2-866
