TM 9-2320-366-10-2
2-74. AMBER WARNING LIGHT KIT INSTALLATION/REMOVAL
(CONT)
CAUTION
Ensure cable has enough slack after inner tube is raised to prevent cable
from rubbing against mast. Failure to comply may result in damage to
equipment.
(6) Lift up on handle (7) to raise inner tube (6) to full up position.
(7) Install pin (2) in mast (3).
(8) Install clevis pin (1) in pin (2).
(9) Install pin (5) in handle (7).
(10) Install clevis pin (4) in pin (5).
f. Lower Mast (from Mid-Position) (M1089 Only).
NOTE
Left and right side masts are lowered the same way. Right side
shown.
(1) Remove clevis pin (1) and pin (2) from mast (3).
2-870