TM 9-2320-366-10-2
(22) Install clip (27) between mirror support
(30) and bracket (32).
(23) Install screw (29), two washers (28),
and nut (26).
NOTE
Perform steps (24) through (33)
on cab roofs equipped with
machine gun ring.
Steps (24) and (25) require the
aid of two assistants.
Lift edges of cab roof until y-
adapter can be installed.
(24) Lift front and rear of cab roof (33).
(25) Install y-adapter (34) on machine gun
ring (35).
(26) Position LMHC hook (36) over cab roof
(33).
CAUTION
Hook must be installed on
hole closest to the front of
cab roof. Failure to comply
may result in damage to
equipment.
(27) Install LMHC hook (36) to y-adapter
(34).
Change 1