TM 9-2320-366-10-2
3-12. M1094 AIR DROP PREPARATION (CONT)
(8) Align small hole of slide assembly (7)
with middle hole of slide assembly
receptacle (4).
(9) Install small pin (9) in slide assembly
(7) and slide assembly receptacle (4).
(10) Install large pin (6) in slide assembly
(7) and slide assembly receptacle (4).
(11) Install two safety pins (5) and (8) in
pins (6) and (9).
e. Load Spreader Installation.
NOTE
A load spreader is mounted
on both sides of vehicle. Left
side is shown.
Steps (1) through (8) require
the aid of an assistant.
(1) Remove two safety pins (1) from pins
(2) on vehicle.
(2) Remove two pins (2) and front load
spreader (3) from vehicle.
3-180
