TM 9-2320-387-10
CAUTION
Tire chains are only used when extra traction is required and must be
used as an axle set. Any other combination may cause damage to the
drivetrain.
a. Tire Chain Installation.
(1) Spread out tire chain assembly (1) and line up with tire.
(2) Cautiously move or drive vehicle over tire chain assembly (1) until wheel
is positioned at either end of chain assembly (1), allowing tire chain assembly (1) to
be draped up and over tire.
(3) Maneuver tire chain assembly (1) until cross-link sections are evenly
spaced around tire. Secure one side of tire chain assembly (1) to tire by hooking
inside fastener (2) to chain assembly (1). Tighten chain assembly (1) as much as
possible.
(4) Repeat steps 1 through 3 until all tire chain assemblies have been
properly installed.
(5) Hook end fastener (3) to chain assembly (1) and secure with locking
retainer (4) to tighten chain assembly (1). Ensure as many chain links as possible
lay between the sidewall head lugs (5) on both sides of tires.
(6) Move vehicle forward a few feet and retighten chain assembly (1) to
remove any slack from where tire was resting on chain assembly (1). Secure loose
chain linkage to chain assembly (1) with wire or other field expedient method.
Change 1
