TM 9-2320-387-10
Table G-1. Lubrication (Cont'd).
EXPECTED
USAGE
FLUID/LUBRICANT
CAPACITIES
TEMPERATURES
Dexron II or
Steering
Refer to
All Temperatures
Dexron III
System
Steering System
Capacities
Upper and
GAA
As Required
All Temperatures
Lower Ball
(MIL-G-10924)
Joints, Tie Rod
Ends, Pitman
Shafts, etc.
Hinges, Cables, OE/HDO
As Required
All Temperatures
OE/HDO 15/40 (Grade 15W-40) lubricant may be used when expected temperatures
are above +5F (-15C). If OEA-30 lubricant is required to meet the temperature
ranges prescribed in the lubrication table, then the OEA-30 lubricant is to be used
in place of OE/HDO 10 lubricant for all temperature ranges. If operating conditions
are severe or abnormal, service chassis lubrication points at 1,000 mi (1,609 km).
Door Latches
PL-S
As Required
All Temperatures
and Wire
(VV-L-800)
Handle Lock
GREASE, WIRE ROPE
(MIL-G-18458)
ALL TEMPERATURES
FUEL REQUIREMENTS -- TEMPERATURE LIMITS (VV-F-800)
Grade DF2 Fuel For use above +10F (-12C)*
Grade DF1**
For use below +10F (-12C) to above -20F (-29C)
Grade DFA
For use below -20F (-29C)
Grade JP-8
All Temperatures
* Temperature limits may vary, dependent on the cloud point of the
actual DF2 fuel being supplied in the geographical area.
** DF1 is not normally procured in CONUS or OCONUS. Refineries will
blend DF2 with kerosene to meet temperature requirements of DF1.
Change 3