Figure 1-3. 1/4-ton. 2-wheel Maintenance Trailer, Telephone Cable Splicer M367.
b. Springs and Shock Absorbers (fig. 1-4). The
bolt in the rear. The shock absorbers are direct-
frame is suspended on two semielliptical leaf type
acting, two-way control units mounted on rubber
springs with double wrapped eyes. Each spring has
bushings. The shock absorbers are nonadjustable
ten leaves held by a center bolt and four rebound
and nonrefillable, and cannot be repaired or
rebuilt.
clips. The springs are attached to the frame by
means of a pivot bolt in the front and a shackle U-
1-3