TM 9-2330-203-14&P
4-50. SPRING ASSEMBLY REPLACEMENT ((M197A1 AND M198A1) (Con't).
NOTE
Use detergent and water solution on bushings to ease assembly.
7.Raise axle and position radius rod (5) for installation. Install two bushings (11), spacer (23), and two packing retainers
(12).
8.Install screw (22) two nuts (13 and 14).
9.Tighten setscrew (6) in radius rod (5).
10.Raise axle until outer ends of spring assembly (21) bear against rollers (17).
11.Install bolt (1), nut (3), and new cotter pin (4) in spring brackets (2 and 16)
12.Install wheel and tire assembly (para 4-38).
13.Remove jackstands and lower frame.
4-118
