TM 9-2330-205-14&P
AIR CHAMBER - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
a.
With brakes released, insert through
1/4-inch rod (2)
Inspection
14.
inspection hole (1) until rod (2)
hole (1)
stops.
Mark rod (2) at surface of mounting
b.
bracket (3).
Have assistant apply brakes in towing
c.
vehicle.
Rod (2) will be pushed out.
Mark rod (2) at surface of mounting
d.
bracket (3) again.
Measure distance between marks.
e.
Distance measured will indicate push
rod travel.
NOTE
If measured distance is not between 1/2 and 7/8 inch (12.7 and 22.2 millimeters),
brakes must be adjusted (page 4-46).
Repeat step 14 after brake adjustment.
NOTE
FOLLOW-ON MAINTENANCE: Test for leaks (page 4-75).
TASK ENDS HERE
TA223344
4-67
