TM 9-2330-205-14&P
AIR CHAMBER - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REPAIR
WARNING
The return spring inside of the chamber is under tension. The two halves of the chamber
must be clamped together in a vise before removing all of the screws and nuts that hold it
together. Failure to do so could cause serious injury to personnel.
a. Using two 1/2-inch wrenches, remove.
Sixteen bolts (3),
Air chamber halves
6.
b. Separate chamber halves (1 and 2).
washers (4), and
(1 and 2)
nuts (5)
a. Remove.
Diaphragm (6), rod
7.
Discard diaphragm (6).
(7), retainer (8),
b. Assemble using new diaphragm (6).
packing (9), and
spring (10)
Using two 1/2-inch wrenches, install.
Sixteen bolts (3),
8.
washers (4), and
nuts (5)
TA223342