TM 9-2330-205-14&P
LANDING LEG REPAIR
This task covers:
a. Disassembly (page 5-7)
b. Assembly (page 5-9)
INITIAL SETUP
Tools
Tools Continued
Hammer, ball-peen
Wrench, pipe
Handle, reversible, 3/8-inch square
Wrench, socket-head, 5/16-inch
drive
Punch
Equipment Condition
Socket, 1/2- by 3/8-inch square
drive
Landing leg removed (page 4-82).
Wrench, open-end, 15/16-inch
ACTION
LOCATION
ITEM
REMARKS
NOTE
Fully extend landing leg by turning crank handle counterclockwise.
DISASSEMBLY
1.
Tube upper (1)
Four capscrews (2)
Using 1/2-inch socket wrench, remove.
and four lock-
washers (3)
2.
Housing (4)
Tube upper (1)
Remove.
TA223369
