TM9-2330-207-14
C. Disassembly. When performing routine air filter maintenance, the filter element (2,fig. 4-51), centering
washer (3) and spring (4) may be removed without replacement.
1. Body
2. Element
3. Washer
4. Spring
5. Washer
6. Adapter nut
7. Pipe plug
d. Replacement of Air Filter with Tubing.
(1) When replacement of the 3/8 inch metal lines or filter assemblies is required, substitute a suitable
length of nylon tubing using the following materiels.
P/N CPR103709-3
. Nylon tubing
. Union assembly P/N MS39187-2
P/N CPR102321-1
. Insert
(2) Procedure for splicing air line.
(a) Disconnect air line connector from both sides of air filter. Remove U-bolt securing air filter
NOTE
Insert not needed on copper tube.
(b) Cut 12 inches from copper tube going forward and install new nut and sleeve. Install sleeve
1/4 inch from end of tube.