TM9-2330-207-14
4-62. LANDING LEG (WESTRAN)
a. Removal of Drive Shaft and Coupling (Westran) (fig. 4-60).
(1) Block the semitrailer on support stands.
(2) Block wheels to prevent movement of semitrailer.
(3) Crank the landing leg up slightly.
(4) Remove nuts (6), washers (5) and bolts (3).
(5) Remove drive shaft (4) and coupling (2).
b. Gear Box Removal (Westran) (fig. 4-61).
(1) Remove four nuts (1), eight washers (2)
and four bolts (3).
(2) Remove gear box (4) from leg (5).
c. Crank Removal and Repair (Westran) (fig. 4-62).
(1) Remove nut (1), washers (2) and bolt (3).
(2) Remove crank (5) and seal (4).
(3) Replace parts as required.
(4) Install new seal (4) and then install crank (5).
(5) Install two washers (2), bolt (3) and nut (1).
