TM9-2330-207-14
(2) Replacement of lock plate assembly.
(a) Remove three screws (36, fig. 4-74) on outside of right hand door that secures the door
handle (13, fig. 4-74). Slide off door handle.
(b) Remove 24 screws from around edge of lock plate assembly (fig. 5-8) on inside of right
hand door.
(c) Remove lock plate assembly.
(d) position new or repaired lock plate assembly on inside of right hand door (fig. 5-8) and
secure with 24 No. 10 X 3/4 screws.
(e) Slide door handle (13, fig. 4-74) into place from the outside of door and secure with three
No. 14 X 3/4 screws (36, fig. 4-74).
(3) Repair. Straighten bent metal parts if feasible. Repair cracks or fractures by welding. Repair or
replace defective lock plate assembly (see (2) above). Remove adjacent wood parts to prevent
charring when welding. Clean and repaint metal and/or wood parts which may be bare or where
paint has been destroyed during welding,
(4) Installation, Install doors by following procedures shown in steps 3 and 4 of figure 5-7.
