TM 9-2330-211-14&P
3-9.
WHEEL AND TIRE ASSEMBLY (Con't)
ACTION
LOCATION
ITEM
REMARKS
NOTE
If inner wheel and tire assembly does not need to be
removed, go to step 17.
8.
Shackle box
Hydraulic jack (5)
Using handle, lower until inner wheel and tire
bracket (6)
assembly (9) is on the ground.
9.
Studs (16)
Six nuts (14 or 15)
Using lug wrench, loosen.
10.
Shackle box
Hydraulic jack (5)
Using handle, raise until inner wheel and tire
bracket (6)
assembly (9) is off the ground.
11.
Studs (16)
Six nuts (14 or 15)
Using lug wrench, unscrew and take off.
12.
Spacer plate (1 O)
Pull off from studs (16).
13.
Inner wheel and tire
With help of assistant, take off.
assembly (9).
INSTALLATION
14.
Studs (16)
Inner wheel and tire
With help of assistant, place on studs (16).
assembly (9)
15.
Spacer plate (10)
Slide over studs (16).
16.
Six nuts (14 or 15)
a. Have assistant hold inner wheel and tire assem-
bly (9).
b. Using lug wrench, screw on and tighten six nuts
(14 or 15).
3-20
