TM 9-2330 -211-14&P
4-18. RECEPTACLE
This Task Covers:
a.
c.
Installation
Removal
b.
Replacement of Contact Pin
Initial Setup:
Tools/Test Equipment:
Materials/Parts:
Extension, 6 in., 1/2 in. drive
Contact pin (as required)
q
q
Handle, ratchet, 1/2 in. drive
Solder (Item 12, Appendix E)
q Pliers, long round-nose
q Screwdriver, flat-tip
Personnel Required: Two
q Socket, 7/16 in., 1/2 in. drive
q Soldering gun
q Wrench, open-end, 7/16 in.
REMOVAL
Cover (6) and
Four nuts (1),
Using screwdriver, socket, extension, and handle,
1.
receptacle assembly
Iockwashers (2),
unscrew and take out.
(7) to semitrailer (8)
ground wire (3),
and screws (5)
2.
Front of
Pull away from semitrailer until clear.
Cover (6) and
semitrailer
receptacle
assembly (7)
REPLACEMENT OF CONTACT PIN
3.
Receptacle
Nut (17)
Unscrew and remove.
connector (15)
4.
Receptacle
Bushing (16)
Pull out of receptacle connector (1 5).
connector (15)
TA506863
4-46
