TM 9-2330-211-14&P
4-33. HUB, DRUM, WHEEL BEARINGS, AND AXLE SEAL (Con't)
ACTION
LOCATION
ITEM
REMARKS
23.
Two bearing cups (22
a. Using brass drift and hammer, tap inner
and 23)
bearing cup (22) into position.
b. Turn hub (3) over and repeat step a for outer
bearing cup (23).
24.
Drum (2)
Hub (3)
a. Lift and aline studs (20) on hub (3) with holes in
drum (2).
b. Slide together.
25.
Six studs (20)
Six hex nuts (19)
a. Have helper hold hub (3).
at inside of
b. Using 1
in. socket and handle, screw in and
drum (2)
tighten.
26.
Hub (3)
Two bearing cups (22
Apply thin coating of grease.
and 23)
27.
Pack with grease.
Two bearing cones (4
and 12)
4-101
