TM 9-2330-211-14&P
4-33. HUB, DRUM, WHEEL BEARINGS, AND AXLE SEAL (Con't)
ACTION
REMARKS
ITEM
LOCATION
Aline keywasher tab (31) with axle spindle
a.
Keywasher(11)
Axle spindle (1)
32.
keyway (29).
b.
Slide on.
Keywasher hole (32) must aline with dowel (30).
c.
If keywasher hole (32) does not aline with dowel
d.
(30), slide keywasher (11) off axle spindle (1).
Using 3 in. locknut socket and handle, un-
e.
screw wheel bearing adjusting nut (5) so that
dowel (30) alines with next hole (32) on keywash-
er(11).
Using 3 in. locknut socket and handle, screw in and
Jamnut (10)
33.
tighten.
a. Coat lightly with grease.
Gasket (9)
Hub (3)
34.
b. Place on hub (3) with holes alined.
Place on gasket (9) and aline holes.
Access cover (6)
Gasket (9)
35.
in. socket and handle, screw in and
Using
Six screws (8) and
Access cover (6)
36.
tighten.
lockwashers (7)
FOLLOW-ON MAINTENANCE:
1. Perform major brake adjustment (para 4-22).
2. lnstall wheel and tire assembly (para 3-9).
TASK ENDS HERE
4-34. WHEEL, TIRE, AND TUBE
Refer to TM 9-2610-200-24 for information on wheel, tire, and tube maintenance.
4-103
