TM 9-2330-213-14&P
Section VIII, WHEELS, HUBS, AND BRAKEDRUMS MAINTENANCE
Page
Paragraph Title
Number
Hub, Wheel Bearing, and Brakedrum Maintenance
(M103A1, M105A1, and M107A1) . . . . . . . . . . .
(M103A3, M105A2, M105A2C,
Hub, Wheel Bearing, and Brakedrum Maintenance
M107A2, and M107A2C) . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..
Tire and Tube Maintenance . . . . . . . . . . . . . . . . . .
........... ................. ............
4-48. HUB, WHEEL BEARING, AND BRAKEDRUM MAINTENANCE (M103A1 ,
M105A1 ,
AND
M107A1).
This Task Covers:
Removal
Installation
a.
d.
Wheel Bearing Adjustment
b.
Disassembly
e.
c.
Assembly
Initial Setup:
Materials/Parts:
Equipment Conditions:
Wheel removed (para 3-8).
One gasket
Tools/Test Equipment:
One oil seal
General mechanic's tool kit
References:
Floor jack
TM 9-214
Jackstand
Wheel bearing socket, in. drive, 3 in.
1.
Position jackstand under axle (9) and remove floor jack.
2.
Remove eight screws (1), lockwashers (2), hubcap (3), and gasket (4) from hub (13). Discard
Iockwashers and gasket.
Remove outer adjusting nut (5), keyed washer (6), and inner adjusting nut (7) from hub (13) and axle (9).
3.
4.
Pull hub (13) out slightly on axle (9) to loosen outer wheel bearing cone (8). Remove outer wheel bearing
cone from hub and axle.