TM 9-2330-213-14&P
5-5. CARGO BODY MAINTENANCE (M105A2 AND M105A2C).
This Task Covers:
Installation
Removal
c.
a.
Repair
b.
Initial Setup:
Tools/Test Equipment:
Materials/Parts:
Ten lockwashers
General mehanic's tool kit
Welder's tool kit
References:
Personnel Required: Two
TB 9-2300-247-40
q
q TM 9-237
a . REMOVAL
1.
Remove ten nuts (2), Iockwashers (3), and screws (4) from cargo body (1) and chassis (5). Discard
Iockwashers.
WARNING
Stand clear of lifting device when raising or lowering cargo body (1). Failure to
follow this warning may result in serious injury or death.
2.
Using a suitable lifting device, lift cargo body (1) from chassis (5).
Refer to TB 9-2300-247-40 for instructions on cargo body repair.
c.
INSTALLATION
WARNING
Stand clear of lifting device when raising or lowering cargo body (1). Failure to
follow this warning may result in serious injury or death.
1.
Lift cargo body (1) into position on chassis (5).
NOTE
Perform step 2 if front mounts on cargo body (1) do not aline with holes on chassis
(5).
2.
Remove front mounts from cargo body and weld in proper position (TM 9-237).
Install ten screws (4), new Iockwashers (3), and nuts (2) on cargo body (1) and chassis (5).
3.
