TM 9-2330-213-14&P
Section V. SHOP VAN BODY MAINTENANCE (M448)
5-10. SHOP VAN BODY MAINTENANCE.
This Task Covers:
Installation
Removal
a.
c.
Repair
b.
Initial Setup:
Tools/Test Equipment:
Materials/Parts:
Two liners
General mechanic's tool kit
q
q
q Eight locknuts
q Welder's tool kit
References:
Personnel Required: Two
TM 9-237
q
WARNING
Stand clear of lifting device when raising or lowering shop van body (1). Failure to
follow this warning may result in serious injury or death.
1.
Remove eight locknuts (4) and screws (2) from shop van body (1) and chassis (5). Discard locknuts.
2.
Using a suitable lifting device, carefully lift shop van body (1) from chassis (5).
Remove two liners (3) from chassis (5). Discard liners.
3.
Refer to TM 9-237 for instruction on shop van body repair.
c. INSTALLATION
WARNING
Stand clear of lifting device when raising or lowering shop van body (1). Failure to
follow this warning may result in serious injury or death.
1.
Position two new liners (3) on chassis (5).
2.
Carefully lift shop van body (1) on chassis (5).
Install eight screws (2) and new locknuts (4) on shop van body (1) and chassis (5).
3.