TM 9-2330-227-14&P
AIR LINES AND FITTINGS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION - CONTINUED
Starting at far right side, tap boards
Six planks (14) and
34.
five planks (15)
in place using ball-peen hammer.
24 screws (18)
Screw in, and tighten using number two
Six planks (14),
35.
cross-tip screwdriver.
crossmember (16),
and frame
bracket (17)
18 screws (19)
Five planks (15),
With aid of assistant, screw in, and
36.
and nuts (20)
tighten using 3/16-inch flat-tip screw-
crossmember (16),
driver and 1/2-inch box-end wrench.
and frame
bracket (17)
Paneling (21)
Two moldings (22)
Put in place.
37.
20 screws (23)
Two moldings (22)
Screw in, and tighten using number two
38.
cross-tip screwdriver.
4-123
