TM 9-2330-227-14&P
AIR LINE REPAIR
This task covers:
Repair (page 4-124)
INITIAL SETUP
Materials/Parts - Continued
Tools
Nuts (appendix G)
Cutter, tube, heavy duty
Pliers, long round-nose
Sleeves (appendix G)
Tape, teflon (item 20, appendix E)
Reamer, tube, inner and outer
Tubing, copper, (as required) (appendix G)
Wrench, adjustable, 8-inch
Wrench, box-end, 9/16-inch
P e r s o n n e l Required
Wrench, open-end, 9/16-inch
Wrench, open-end box, 5/8-inch
One
Materials/Parts
Equipment Condition
Adapter (appendix G)
Air reservoir drained (page 2-13).
Coupling, pipe (appendix G)
ACTION
ITEM
REMARKS
LOCATION
REPAIR
Damaged tube
a. Using tube cutter, cut out.
1. Air line (1)
section (2)
b. Take off.
2. Frame member (3)
Using long round-nose pliers, pull out.
Grommet (4)
Tubing (5)
a. Using tube cutter, cut 3/4-inch
3.
(1.9 cm) shorter than damaged tube
section (2).
b. Using reamer, take off burrs.
c. Push tubing (5) through hole in frame
member (3).
4-124
