TM 9-2330-227-14&P
HUB AND DRUM - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
REMOVAL - CONTINUED
Using seal puller, take off and separate.
Seal (15)
13. Hub (2) or
spindle (6)
Take out.
Inner bearing (16)
14. Hub (2)
Two bearing
Using cup puller/instailer, take out.
15.
cups (17)
Using seal puller, take off.
Wiper (18)
16. Spindle (6)
Ten studs (19),
a. Using 5/8-inch socket, ratchet handle
17. Drum (12) and
with 1/2-inch drive, and 5/8-inch
ten nuts (20),
adapter plate (13)
Iockwashers (21),
open-end wrench, unscrew and
take off.
and inspection
b. Using ball-peen hammer and 3/8-inch
hole cover (22)
brass drift, drive studs (19) out.
Adapter plate (13)
Using ball-peen hammer, unseat and
18. Drum (12)
separate.
INSTALLATION