TM 9-2330-227-14&P
WIRE HARNESS, 24-VOLT, RUNNING LIGHTS - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION - CONTINUED
Put on.
Two grommets (4)
63. Wire (1) and
harness branches
(2) and (3)
Using 3/16-inch flat-tip screwdriver,
Two grommets (4)
64. Frame rail (5)
push in.
Place in position.
Wire (1) and
65. Right rear
harness branch (2)
corner (6)
Put on.
Four clamps (7)
66. Wire (1) and
harness branch (2)
Place in position.
Harness branch (3)
67. Left rear
corner (8)
Four clamps (7)
Put on.
66. Harness
branch (3)
Eight screws (9)
Screw in, and tighten using 3/16-inch
69. Eight clamps (7)
and nuts (10)
flat-tip screwdriver and 7/16-inch
box-end wrench.
Three connector
Match wire numbers, and connect together.
70. Left front
halves (12)
Repeat this step on remaining
clearance
Iights (11)
clearance and identification lights.
5-22
