TM 9-2330-227-14&P
DECK - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REPAIR - CONTINUED
If removed, put through hole in deck
Plate assembly (1)
26. Left rear
and clamp together.
and plate and
deck
catch assembly (2)
If removed, screw in and tighten using
Screw(s) (4)
27. Harness clamp(s) (3)
number two cross-tip screwdriver.
underside of deck
If removed, put on.
Striker
28. Deck at
plate (5)
side door
Two screws (6) and
a. Position screws (6) and screws (7)
29. Striker
as noted.
two screws (7)
plate (5)
b. Screw in, and tighten using number two
cross-tip screwdriver and 3/16-inch
flat-tip screwdriver as needed.
If removed, put on.
Threshold
30. Deck at
plate (8)
side door
Three screws (9)
Screw in, and tighten using 3/16-inch
31. Threshold
flat-tip screwdriver, 1/2-inch socket,
and nuts (10)
plate (8)
and ratchet handle with 1/2-inch drive.
Striker
If removed, put on and place in
32. Deck at rear
plates (11)
doors
original position.
Four screws (12) and
a. Position screws (12) and screws (13)
33. Striker
four screws (13)
as noted.
plates (11)
b. Screw in, and tighten using number two
cross-tip screwdriver and 3/16-inch
flat-tip screwdriver as needed.
Threshold
If removed, put on.
34. Deck at
plate (14)
rear doors
Four screws (15)
Screw in, and tighten using 3/16-inch
Threshold
flat-tip screwdriver, 1/2-inch socket,
plate (14)
and nuts (16)
and ratchet handle with 1/2-inch drive.
Molding (17)
Put in place.
Rear wall
Screws (18)
Molding (17)
Screw in, and tighten using number two
cross-tip screwdriver.
Molding (19)
Put in place.
Side wall