TM 9-2330-231-14&P
Section VIII. AXLE
AXLE MAINTENANCE
This Task Covers:
INITIAL SETUP
Tools
Tools - Continued
Handle, reversible, 3/8-inch square
Wrench, open-end, 9/16-inch
drive
Wrench, box-end, 15/16-inch
Handle, reversible, I/2-inch square
Wrench, box-end, 1 1/8-inch
drive
Jack, hydraulic floor
Personnel Required
Mallet, plastic
Socket, 9/16- by 3/8-inch square
Two
drive
Socket, 518- by 318-inch square
Equipment Condition
drive
Socket, 15/16- by 1/2-inch square
drive
Wrench, open-end, 7/16-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Because this procedure begins with both hubs and drums removed, the axle is
already supported on jack stands.
1. Axle (1)
Jack (2)
a.
Place under and lift axle (1) on left
side so that it clears left side jack
stand (3).
b.
Position left side jack stand (3) under
left side of rear frame member(4).
c.
Lower and remove jack (2).
4-38