TM 9-2330-231-14&P
HANDBRAKE CABLE ASSEMBLY - CONTINUED
INITIAL SETUP
Tools
Materials/Parts
Handle, reversible, 3/8-inch square
Cotter pin
drive
Pliers
Equipment Condition
Socket, 1/2- by 3/8-inch square
drive
Hub and brakedrum removed (page 4-103).
Wrench, open-end, 7/16-inch
Wrench, open-end, 1/2-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Clevis (1) to
Cotter pin (3) and
Using pliers, remove.
hand brake
clevis pin (4)
Throw away cotter pin (3).
lever (2)
2.
Frame (5
Two nuts (6), two
Using socket and 1/2-inch wrench,
capscrews (7), and
r e m o v e.
strap (8)
3.
Cable bracket
Two nuts (10)
Using 7/16-inch wrench, loosen.
guide (9)
4.
Brake lever (11)
Handbrake cable (12)
Unhook.
5.
Cable bracket
Handbrake cable (12)
Slide out.
guide (9)
6.
Handbrake
Nut (13) and
Using 1/2-inch wrench, remove.
cable (12)
clevis (1)
INSTALLATION
7.
Handbrake
Nut (13) and
a.
Screw on nut (13).
cable (12)
clevis (1)
b.
Screw on clevis (I).
Do not tighten.
8.
Cable bracket
Handbrake cable (12)
Slide in.
guide (9)
9.
Brake lever (11)
Handbrake cable (12)
Hook Into place.
4-40
