TM 9-2330-231-14&P
SERVICE BRAKE ADJUSTMENT
This task covers:
Adjustment
INITIAL SETUP
Tools
Tools - Continued
Handle, reversible, 3/8-inch square
Jack, hydraulic
drive
Socket, 5/8- by 3/8-inch square drive
ACTION
LOCATION
ITEM
REMARKS
NOTE
Procedure given is for one wheel.
1.
Axle (1)
Tire and wheel (2)
Using jack (3), raise.
2.
Backing plate (4)
Lower adjusting
a.
Using socket, turn adjusting
stud (5)
stud (5) counterclockwise until
wheel just locks.
b. Back off enough so wheel just turns
freely.
3.
Upper adjusting
Repeat step 2.
stud (6)
4.
Axle (1)
Wheel (2)
Using jack (3), lower.
NOTE
FOLLOW-ON MAINTENANCE: Adjust handbrake (page 3-4).
TASK ENDS HERE
TA223885
4-51
