TM 9-2330-231-14&P
SERVICE BRAKE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION CRITERIA
12.
Brakeshoe (1)
Lining (2) and
a.
Inspect shoes (1) for cracks.
rivets (3)
b.
Inspect linings (2) for cracks, loose-
ness to shoes (I), or a thickness of at
least 1/8 inch (3.2 mm).
c
Inspect rivets (3) for looseness.
Rivets (3) should beat least 1/16 inch
(1.6 mm) below surface of lining (2).
ASSEMBLY
13.
Brakeshoes
Pins (3, 4,5,
Using 9/16-inch wrench, install.
(1 and 2)
and 6), four nuts
(7), and four
lockwashers (8)
14.
Backing plate (9)
Four capscrews (10),
Using 9/16-inch wrench and 9/16-inch
four lockwashers
socket, install.
(1 1), four nuts
(12), adjuster (13),
and cable guide (14)
15.
Four capscrews (10),
Using 9/16-inch wrench and 9/16-inch
four lockwashers
socket, install.
(11), four nuts
(12), and
adjuster (15).
16.
Brakeshoe (2)
Place in position.
17.
Brakeshoe (2) to
Nut (16), lockwasher
Using 7/16-inch socket, install.
backing plate (9)
(17), flat washer
(18), sleeve (19),
and bolt (20)
TA223887
4-54
