TM 9-2330-231-14&P
METAL AIRBRAKE LINE REPLACEMENT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
AIR HOSE ELBOW TO AIR FILTER - CONTINUED
30.
Frame rail (1)
Air line (2)
Place in position.
31.
Two clamps (3) to
Two screws (4)
Using screwdriver, install.
frame rail (1)
32.
Elbow (5) to air
Nut (6)
Using 5/8-inch wrench, install.
line (2)
33.
Air filter (7) to
Nut (8)
Using 5/8-inch wrench, install.
air line(2)
AIR FILTER TEE TO RELAY VALVE, RIGHT
34.
Air line (9) to
Nut (11)
Using 3/4-inch wrench, remove.
tee (10)
35.
Air line (9) to
Nut (13)
Using 5/8-inch wrench, remove.
36.
Frame rail (1)
Air line (9)
Remove.
Discard air line (9), two sleeves
(14), and nuts (11 and 13).
NOTE
Nuts must be installed on proper ends of air line. Use the old line as a guide to
avoid making a mistake.
37.
Air line (9)
Two sleeves (14) and
a.
Slide nut (11) onto one end of air
nuts (11 and 13)
line (9).
b.
Slide nut (13) onto other end of air
line (9).
c.
Slide one sleeve (14) onto each end of
air line (9).
38.
Frame rail (1)
Air line (9)
Place in position.
39.
Air line (9) to
Nut (13)
Using 5/8-inch wrench, install.
40.
Air line (9) to
Nut (11)
Using 3/4-inch wrench, install.
tee (10)
4-92