TM 9-2330-231-14&P
METAL AIRBRAKE LINE REPLACEMENT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
UNION TO SHUTOFF COCK - CONTINUED
1.
Union (1) to air
Nut (3)
Using 9/16- and 5/8-inch wrenches,
line (2)
remove.
2.
Shutoff cock (4)
Nut (5)
Using 5/8-inch wrench, remove.
to air line (2)
3.
Two clamps (6) to
Two screws (8)
Using screwdriver, remove.
frame rail (7)
4.
Frame rail (7)
Air line (2)
Remove.
5.
Air line (2)
Two clamps (6)
Remove.
Discard air line (2), two sleeves
(9), and nuts (3 and 5).
6.
Air line (2)
Two sleeves (9) and
a.
Slide nut (5) onto one end of air
nuts (3 and 5)
line (2).
b.
Slide nut (3) onto other end of air
line (2).
c.
Slide one sleeve (9) onto each end of
air line (2).
7.
Two clamps (6)
Install.
8.
Frame rail (7)
Air line (2)
Place in position.
9.
Two clamps (6) to
Two screws (8)
Using screwdriver, install.
frame rail (7)
10.
Shutoff cock (4)
Nut (5)
Using 5/8-inch wrench, install.
to air line (2)
11.
Union (1) to air
Nut (3)
Using 9/16- and 5/8-inch wrenches,
line (2)
install.
AIR FILTER TEE TO UNION
NOTE
This task is for one side only. The steps for the opposite side are the same.
4-88
