TM 9-2330-231-14&P
PACKING, SHIPMENT, AND STORAGE
PREPARATION FOR SHIPMENT
CAUTION
The height and width of the trailer packaging must not exceed the limits of the loading table in
TM 55-200 when preparing the trailer for shipment by railroad. Consult the local transportation
officer, whenever possible, for limitations of the railroad lines to be used, so that delays,
dangerous conditions, and damage to equipment are avoided.
Increase tire pressure to 45 psi (310 kPa) for rail shipment, unless the weather is expected to be hotter than 90F (32.2C)
during shipment.
Protect the trailer against corrosion by coating all unpainted surfaces with grease or oil. Lubricants listed in the Lubrication
Chart (page 4-3) maybe used for this purpose. Check the trailer for corrosion frequently during shipment and recoat with oil
or grease if necessary.
Prepare the trailer for shipment by processing it in accordance with TM 740-90-1. Check the trailer for corrosion frequently
during shipment and recoat with oil or grease if necessary.
Prepare the trailer for shipment by processing it in accordance with TM 740-90-1.
4-134
