TM 9-2330-231-14&P
GENERAL
This section provides instructions for direct support and general support maintenance of the ammunition trailer. The following
initial setup information applies to all procedures:
Resources required are not listed unless they apply to the procedure.
Personnel are listed only if the task requires more than one technician. If Personnel Required is not listed, one technician
can do the task.
The normal standard equipment condition to start a maintenance task is power off. Equipment condition is not listed unless
some other condition is required.
BRAKESHOE
This task covers:
a. Disassembly (page 5-2)
c. Inspection (page 5-2)
b. Cleaning (page 5-2)
d. Assembly (page 5-3)
INITIAL SETUP
Tools
Equipment Condition
Reliner, brake and clutch
Brakeshoes removed (page 4-52).
Materials/Parts
Linings, 4 each
Rivets, 64 each
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY
1. Brake linings (1)
Rivets (2)
Using brake reliner, remove rivets (2)
and linings (1).
CLEANING
2. Brake linings (1)
Brakeshoes (3)
See cleaning instructions.
INSPECTION
3.
Brakeshoes (3)
Check for cracks and distortion.
4.
Pivot holes (4) and
Check for excessive wear.
cam-roller holes (5)
Discard bad brakeshoes (3).
5-2
